Zone Imaging Eco Zonefix 1L

Zone Imaging Eco Zonefix is a rapid fixer that comes in powder form. This fixer is eco-friendly, odourless, alkaline and non-hardening. You dilute it with water to make one litre of working solution, ready to use. Ideal for use with Zone Imaging 510 Pyro Film Developer.

£7.99 Inc VAT

Only 1 left in stock

Description

Zone Imaging Eco Zonefix 1L

Go Grainless!

Eco Zonefix is ideal for use alongside both conventional B&W film developers, pyro/catechol staining developers and B&W paper developers.

As well as working with all B&W developers this fixer has very little odour. No need to use an acidic stop bath, water will work fine. You get fast washing out times, long shelf life and works will in soft or hard water up to 500ppm.

Sodium thiosulphate based, free from: borate derivatives, non-biodegradable EDTA/DPTA based chelating agents, phosphates, acetic acid, known carcinogens and mutagens.

How To Use

The average recommended minimum fixing times at 20ºC (68ºF) are 2-5 minutes. This takes different types of film into consideration.

Lower ISO films will fix faster than higher ISO films. As with all fixers, unreplenished Eco Zonefix fixing times will increase with use.

For resin coated papers, fixing time is 30 seconds and for fibre-based papers it is 60 seconds.

For more information check out the Eco Zonefix Technical Info PDF.

How To Develop Film

If you would like to learn more about developing your own film, you should read our guides How To Develop Black And White Film and How To Develop Colour Film. Both guides will walk you through each step of developing film at home.

Also, check out How To Develop Film At Home for a list of everything you’ll need. How To Prepare Film Developing Chemistry will explain how to get your chemicals ready for processing. Once you’re ready to go, find your Black And White Film Developing Times.

You can explore further and look at How To Stand Develop Film and Pushing and Pulling Film.