Ilford ID-11 Film Developer 1L

Description

Ilford ID-11 Film Developer 1L

Ilford ID-11 Film Developer 1L is a powdered, fine grain, black and white film developer. Ideal for use with a wide range of black and white films.

ID-11 will give you fine grain negatives without any loss of emulsion speed. It is worth a mention, that ID-11 is known as the industry standard powder developer. It ensures the best balance of fine grain, sharpness and tonal rendition. Producing negatives which allow for a high degree of enlargement.

This is a developer that will give you excellent results with all films. Incredibly versatile, it is ideal where a wide range of films and film speeds have been used.

If you use this as a stock solution there is no need to mix up developer each time. Simply prepare the stock, and reuse the developer until exhausted. Ilford recommends reusing it for up to 10 films. If you decide to use it one-shot, simply discard after use.

Another benefit, Ilford ID11 is a powder developer, making it light and easy to travel with.

All in all, ID-11 is a great choice as a classic, all-round developer. It is also available in 5L packs.

Ilford ID-11 packs contain two parts, A and B. Always make up the developer stock solution to the volume stated on the pack. Do not attempt to prepare smaller quantities by using fractional parts of each powder.

Have a look at the other Black And White Film Developers we have in stock. If you’re not sure which one to pick read our guide to help you Choose Your Film Developer.

How To Use

As it is a powder, you dilute it to make a stock solution first. To prepare Ilford ID-11 1L stock, dissolve the contents of part A in 750ml of warm water at about 40ºC. Stir until the powder has dissolved. Then continue to stir, while gradually adding the contents of Part B. Keep stirring until no more powder dissolves. Add 250ml cold water to make up 1 litre and stir. Allow this to cool to room temperature, then the developer is then ready to use. Store in a tightly capped bottle until needed for use.

Ilford ID-11 can either be used as a stock solution, or it can be diluted further with water for one-shot processing. You can dilute 1+1. That means one part stock solution to one part water. Or you can dilute 1+3. So that is one part stock solution to three parts water. Prepare these working solutions from the stock solution directly before they are needed. Always make sure you mix together thoroughly before use.

How To Develop Film

If you would like to learn more about developing your own film, you should read our guides How To Develop Black And White Film and How To Develop Colour Film. Both guides will walk you through each step of developing film at home.

Also, check out How To Develop Film At Home for a list of everything you’ll need. How To Prepare Film Developing Chemistry will explain how to get your chemicals ready for processing. Once you’re ready to go, find your Black And White Film Developing Times.

You can explore further and look at How To Stand Develop Film and Pushing and Pulling Film.

Film Developing Chemicals

Read our guides? Looking to stock up on film developing chemicals? We have everything you need; Developer, Stop, Fix and Wetting Agent.